Taillights

Be safe out there with Serfas' TL-STN Seat Stay Taillight. This water-resistant safety beacon will get you noticed out on the road with a large, super-bright 1/2-watt red LED flanked by 6 brilliant smaller LEDs. Plus, the weatherproof silicone body stretches to easily mount to any tube on your bike. Use a few Seat Stay Taillights for 360-degrees of visibility! This great light has steady, strobe and flash modes.

Lil' Cobber Rear produces an incredible 330º of light, so you'll be clearly seen from all angles. In an increasingly busy world, this bike light is brilliantly effective at attracting attention and helping keep you safe on the road. Packing 50 lumens this Lil' Cobber is seriously bright. The Cobber has integrated USB recharging, is 100% waterproof and you can program the settings using the Modemaker app. It mounts with tool-less removable silicone straps for bars/seat posts 22 – 32mm+ diameter with magnetic mount (aero Mount also included). If you are looking for the best rear commuter bike light around, look no further. - Light modes: Max, Mid, Steady Pulse, Flash, Eco Flash come pre-programmed - LEDs: Efficient Chip on Board (COB) LEDs designed to provide maximum brightness level for up to 90% of the battery burn time for each mode - Integrated USB plug: No charging cable required, plugs directly into USB ports & is designed to be exposed to the elements - Charge time: 4 hours (LED will turn off when fully charged) - Battery: USB Rechargeable Lithium Polymer - Accessories included: Standard Mount, Aero Mount, 3x interchangeable straps for bars/seat posts 22-27mm / 28-32mm+, and USB extension.

Features: - 30 lumens (Numen+ Tag TL) ANSI standard approved - Runtime: Steady (5hrs), Low Steady (10hrs), Pulse (15hrs), Flash (30hrs), Random (50hrs) - Li-Po rechargeable battery - Power indicator - Auto start sensor - IPX4 Waterproof rating - Integrated USB plug - Flexible mounting system works with different shape handlebars and seatposts

The Plus rear bike light is a super-bright, 100% waterproof and versatile USB rechargeable bicycle light. Mount the light to your seatpost, seat stays, and pannier racks, or use the integrated wearable clip to attach the light to your t-shirt or backpack. More of a runner than a cyclist? No worries. The Plus light also doubles up as a wearable night running light. Just attach the light to your t-shirt, shorts, socks, or headband using the smart integrated clip. With an output of 20 lumens and a run time of up to 40 hours in eco flash, the Plus ensures you are well seen to all other cyclists, road users, and trail runners all night long.

The NiteRider Sentinel 250 is designed to increase cycling safety by way of 2 varying flash patterns and 2 steady beams (High/Group Ride Mode). Behind the durable red lens and casing are two powerful LEDs that emit 250 lumens in the brightest Daylight Visible Flash setting, allowing you to be seen day or night. For enhanced safety, the Laser Lane modes (3) are designed to project ultra-bright laser lines on the ground. This creates a virtual lane for the rider, further increasing visibility. - The Sentinel 250 complies with FDA standard for lasers, notice No. 50, 2007 - Daylight Visible Flash (DVF) - Highly visible laser lanes - All in one, Laser and tail light! - Convenient USB rechargeable - Group Ride Mode – be seen without distracting fellow cyclists - Easy on and off seat post strap mount with quick release tab - FL1 Standard IP64, dust and water-resistant WARRANTY - The Sentinel 250 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Tail Light w/ Laser Lanes - Seat post Mount - USB Cable

The Grid Rear Light has four mode options, you can choose if you need high lumen power or extended run time. Ready for those commuting in the city, riding the open roads, or heading to their local trail. Grid Rear Lights offer plenty of rechargeable power to keep you visible while out riding. - COB LEDS - Pack more LEDs in a small package with a powerfully even and wide light array to help you to be seen while riding in any environment. - ECO MODE - Extremely long run time in our Eco Mode for those riding all week, or on long daily rides. Eco Mode also extends the Pulse and Strobe modes by two hours. - USB-C - Modern USB plug standard to ensure you can stay charged and ready to ride - BATTERY GAUGE - Small color LEDs in the power button help you monitor your light battery power, to tell you when it's time to charge your light once more. Green = 100-50%, Orange = 50-25%, Red = 25-0% - MEETS ANSI FL-1 STANDARD - This standard was created by the American National Standards Institute (ANSI) to provide consistent performance measurements for handheld lights. - IP-65 - Ingress protection rating or 'IP rating', is a techy way to describe the level of water and dust proofness a product has. This light meets the IP-65 standard, which means is totally protected against dust/grit and is fully resist strong jets of water from all directions. - LIMITED LIFETIME WARRANTY - Restrictions and conditions apply.

Describing this light as bright is a serious under-statement. Using new COB technology, Blinder Grid produces a punchy 100 lumens that will ensure you're seen and safe in all light conditions. It features a grid pattern that makes this Blinder one of Knog's most individual lights ever. The graphic flash pattern has 8 different modes and is also available as a front light to make a unique pair. The Blinder Grid has integrated USB recharging, is 100% waterproof and has a whopping 60 hour run-time when using eco flash mode. INTEGRATED USB PLUG No charging cable is required for your Blinder, its integrated USB plugs directly into USB ports. It has a charge time of 4 hours. When your Blinder is running low on battery, a red led will light up next to the button. This ring will turn green and then turn off once the Blinder is fully charged and ready to go. TOOL-LESS MOUNT Blinder lights comes with a tool-less removable silicone straps for bars and seat posts 22 – 32mm in diameter. A large strap is also provided that will fit tubes and head tube profiles with a circumference of up to 200mm. Knog's tool-less mounting system makes attaching your light incredibly simple and using silicone straps means there'll be no chance of damaging your bikes frame or beloved paint job. EASY ON, EASY OFF Removing your Blinder for charging or security purposes is a doddle with our handy clasp removal system. Strong enough to hold your light firmly in place when in use and big enough to use even when wearing gloves in colder conditions, this is a king amongst clasps. BLINDINGLY BRIGHT Producing 100 lumens of light output makes this Blinder a seriously bright option for any cyclist. Efficient Chip on Board (COB) LEDs provide maximum brightness level for up to 90% of the battery burn time. - Dimensions: H: 43mm x W: 43mm x L:46mm - Weight: 34 grams - Charge Time: 4 hours - Lumens: 100

Describing this light as bright is a serious under-statement. Using new COB technology, Blinder Skull produces a punchy 100 lumens that will ensure you're seen and safe in all light conditions. It features a grid pattern that makes this Blinder one of Knog's most individual lights ever. The graphic flash pattern has 8 different modes and is also available as a front light to make a unique pair. The Blinder Skull has integrated USB recharging, is 100% waterproof and has a whopping 60 hour run-time when using eco flash mode. - Dimensions: H: 43mm x W: 43mm x L:46mm - Weight: 34 grams - Charge Time: 4 hours - Lumens: 100 INTEGRATED USB PLUG No charging cable is required for your Blinder, its integrated USB plugs directly into USB ports. It has a charge time of 4 hours. When your Blinder is running low on battery, a red led will light up next to the button. This ring will turn green and then turn off once the Blinder is fully charged and ready to go. TOOL-LESS MOUNT Blinder lights comes with a tool-less removable silicone straps for bars and seat posts 22 – 32mm in diameter. A large strap is also provided that will fit tubes and head tube profiles with a circumference of up to 200mm. Knog's tool-less mounting system makes attaching your light incredibly simple and using silicone straps means there'll be no chance of damaging your bikes frame or beloved paint job. EASY ON, EASY OFF Removing your Blinder for charging or security purposes is a doddle with our handy clasp removal system. Strong enough to hold your light firmly in place when in use and big enough to use even when wearing gloves in colder conditions, this is a king amongst clasps. BLINDINGLY BRIGHT Producing 100 lumens of light output makes this Blinder a seriously bright option for any cyclist. Efficient Chip on Board (COB) LEDs provide maximum brightness level for up to 90% of the battery burn time.

The Plug is a rear light that harkens back to Knog's roots, using an overmolded soft-touch TPU. This light is packed with fresh technology like a domed rear lens, a low battery indicator, and like all Knog bike lights, it's fully USB rechargeable. Designed to work with all genres of bicycles from commuters to aero road bikes, the Plug comes with three different silicone bands for securing it to seatposts. This is a light for every-day, for every ride, for everybody. Increased Side Visibility The specially designed domed rear lens is clever in two ways. First, its domed shape allows for maximum clarity when viewed from head-on. Second, this same domed lens allows for plenty of improved side visibility. Given the fact that 78% of accidents happen with cars not seeing bikes at intersections, any additional visibility from the side can only be a good thing. Easy One Button Operation A large, soft-touch button ensures easy operation of the Plug. The Plug's oversize button allows the user to turn the light on and off with ease, even when wearing gloves. Low Battery Indicator Don't be caught out with an uncharged bike light again. A conveniently placed low battery indicator is placed within the rear Plug's lens so you'll know when exactly when your light needs recharging. USB Rechargeable As with all of Knog's bike lights the Plug is 100% rechargeable. Recharging is achieved with the micro USB port conveniently located behind the large rear button. Using a micro USB cable (not supplied) you can then simply recharge using any USB port. - Dimensions: H: 40mm x W: 33mm x L: 50mm - Weight: 30g - Charge Time: 2.5 hours - Lumens: 10

Giant's Numen TL1 5 LED Taillight boasts 5 bright LEDs so you get noticed out on the road. If that wasn't enough, you have 4 modes: steady, flashing, patrol, and random modes for high visibility in traffic. And it runs for up to 180 hours. This great water-resistant light also sports 2 mounting options.

To further rider safety and visibility, the CherryBomb 100 employs a custom-made, built-in reflector that allows the rider to be night time visible even when the taillight is in the off position. Clip and bike mounts are included for flexible mounting options. Features - Lumen Output: 100 - 4 Modes with a Run Time up to 136h - 2 x AAA Alkaline Battery Powered - Weight: 82g - Battery: 2 x AAA Alkaline - Highly Visible up to 1 Mile - 100 Lumen Daylight Visible taillight - Water / Dust Resistant IP64 Rated Run Time - Fast Flash—96:00h - Pulse Flash—136:00h - Steady High—72:00h - Steady Low—127:00h

Enhanced Side Visibility Design. 130 Lumens / 2 Solid & 3 Flash Modes. USB C Rechargeable. Unique Fin Lens Design Provides Enhanced Long Distance Visibility While Creating Generous Attention-Grabbing Side Illumination Features: - 130 Lumens (Daytime Flash) - Three Super Bright CREE LEDs - Finned Lens Design Provides 180 Degree Visibility - LED Charge Indicator - Auto Safe Mode* - Daytime Flash Mode - Up To 22 Hours Runtime - USB C Rechargeable - Aero Post Compatible Bracket Solid Modes: - High (50 Lumens): 1 hr 30 mins - Low (15 Lumens): 5 hrs 30 mins Flash Modes: - Daytime Flash (130 Lumens): 19 hrs - High Flash (75 Lumens): 10 hrs - Low Flash (20 Lumens): 22 hrs - *Auto Safe Mode Extends Runtime Additional 45 mins - Weight: 52 Grams w/ Bracket - Battery: 500 mAh Lithium Polymer

Take the lane with the confidence you're using the strongest tail light Blackburn's ever made. Featuring 3 focused LEDs, 270 degrees of visibility, and the 125-lumen BLITZ daytime running mode, the DAYBLAZER has all of your ride needs covered. Also, because of the narrow profile of the light and its unique mounting bracket, the DAYBLAZER 125 tail light can be mounted to just about anything you can think of from round or aero seatposts, to seat stays, to a rear rack, or your back pack. - Charging cable included, no tools required - Lithium-ion battery - Waterproof to IP-67 standard - TIR Lens - LED Fuel Gauge/Charge Indicator - Aluminum Construction - 3 hour recharge time - Runtime Solid: High 1.6hrs (120 lumen), Low 3 hrs (50 lumen) - Runtime Flash/Strobe: 3hrs (125 lumen)/6 hrs (65 lumen) - 78g

Stay clean and stay seen with Topeak's DeFender iGlow. It's a unique rear fender that has an integrated 0.5W light for safety at night or during low-visibility conditions. Strap this impact-resistant plastic fender down quickly and easily to the junction of your bike's seat and top tubes, and adjust it for perfect coverage. With constant and blinking modes, this light is ready when you are.

- Modes include High Flash, Low Steady, DayTime Pulse, NightTime Pulse, and Economic Flash - Fully USB rechargeable: no batteries to buy or replace - Runtime up to 12 hours - Memory function: light turns on at the last mode it was turned off - Power saving function: 10% power or less, lights will automatically switch to lowest lumen output - Built-in battery indicators: RED = less than 25%, GREEN = fully charged - Side illumination ports - Multiple Mounting Options: vertical or horizontal mounting options as well as a clip for mounting to packs, bags or belts

Giant's Numen Mini Lights are small, versatile, and bright. Both the headlight and taillight use super bright LEDs to make sure you're visible in low-light riding situations, and feature your choice of steady or flashing mode. The tool-free rubber mounting hardware is fast, easy to use, and fits nearly every handlebar and seatpost.

NiteLink Wireless Technology allows the rider to pair and simultaneously power on/off the Lumina Max headlight and Omega EVO 300 taillight wirelessly. Lumina Max headlight and NiteLink Remote sold separately. - Maximum 300-lumen output - Run time: 6:00—36:00hrs - Charge time: 2:15hrs - Group Ride Mode: Be seen without distracting fellow cyclists - 2 light levels, 3 flash modes - FL1 Standard IP64 Water Resistant - 79g Includes: - Daylight visible tail light, easy on/off seatpost strap mount, and USB charging cable

Lezyne Ebike Super Bright Alert Taillight: Powerful, low-profile StVZO certified e-bike taillight with custom-programmed Alert Technology. It features 10 high-output emitters that provide a constant 12 lumens and then 24 lumens when deceleration is detected. Its co-molded design is constructed from durable Composite Matrix material, which provides an IPX7 waterproof rating. It comes with an integrated 130 cm (51.2 inches) cable that connects to the e-bike’s motor/battery system. Stainless steel mounting hardware is included. Compatibility: 6 – 12v input, 1.2w / 2.4w (Alert mode). Download the manual below for further installation and compatibility details. - Alert" brake light function - STVZO optimized lens - 130cm cable - Includes stainless steel hardware

Be your own titan of cycling safety—gear up and be seen with the compact and highly visible Serfas Titan Helmet Tail Light. With a higher up and more easily noticed helmet safety light, motorists will appreciate your improved visibility and your mother will thank you for playing it safe. It features a magnetic retention system that safely breaks away during a crash, a Last Mode Memory that remembers the last mode used when you turn the light on, and easily replaceable batteries. - Powerful magnetic helmet mount system with simple install/removal - Ultra Bright Red LED (15 Lumens Max. Output) - Weight: 18g w/ Bracket - Battery: (2x) Lithium CR2032 (Pre-Installed Batteries Included w/ Plastic Pull Tab To Activate Before First Use) - Light Body Dimensions: 29 x 29 x 20mm Modes: - Solid: High – 35 Hours (6 Lumens) / Low – 45 Hours (3 Lumens) - Flash: Daytime High Flash – 60 Hours (15 Lumens) / High Flash – 40 Hours (8 Lumens) / Low Flash – 100 Hours (3 Lumens)

Our Brightest Tail Light Yet! Enhanced Side Visibility Design. 350 Lumens / 2 Solid & 3 Flash Modes. USB C Rechargeable. Unique Fin Lens Design Provides Enhanced Long Distance Visibility While Creating Generous 180 Degree Attention-Grabbing Side Illumination Features: - 350 Lumens (Daytime Flash) - Three Super Bright CREE LEDs - Finned Lens Design Provides 180 Degree Visibility - LED Charge Indicator - Auto Safe Mode* - Daytime Flash Mode - Up To 20 Hours Runtime - USB C Rechargeable - Aero Post Compatible Bracket Solid Modes: - High (140 Lumens): 1 hr 30 mins - Low (15 Lumens): 6 hrs Flash Modes: - Daytime Flash (350 Lumens): 19 hrs - High Flash (200 Lumens): 9 hrs - Low Flash (50 Lumens): 20 hrs - Auto Safe Mode Extends Runtime Additional 45 mins - Weight: 52 Grams w/ Bracket - Battery: 1050 mAh Lithium Polymer

Streamline your bike setup and optimize the height of your compatible Varia rearview radar to help make you more visible to approaching motorists. This optional mount kit allows cyclists to mount and install their compatible Varia device beneath their bicycle saddle on standard alloy seat rails (7mm round). Installation is simple with a 4 mm hex wrench (not included). - Seat rail clamp - Friction flange mount extender - Quarter-turn adapter - Lever-lock adapter - Two M4 bolts

With 2 LEDs pumping out 65 lumens of power, 270 degrees of visibility, and Blackburn's unique BLITZ daytime running mode, the DAYBLAZER 65 is focused on safety, so you can focus on your ride. Also, because of the narrow profile of our unique mounting bracket, the DAYBLAZER 65 tail light can be mounted to just about anything you can think of from round or aero seat posts, to seat stays, to a rear rack, or your back pack - Charging cable included, no tools required - Lithium Polymer battery - Waterproof to IP-67 standard - TIR Lenses - LED Fuel Gauge/Charge Indicator - Polycarbonite Construction - 2 hour recharge time - Runtime: Solid 1.6hrs (50 lumen), High Flash/Low Strobe 3hrs (65 lumen)/6hrs (35 lumen) - 48g

The NiteRider Solas 250 uses two powerful LEDs to produce an amazing 250 lumens of light output. It features 4 modes (2 flash / 2 steady) and is USB rechargeable. We've implemented what we call "Group Ride Mode" for cyclists who want to stay visible but not distract others in the pack. - Daylight Visible Flash (DVF) - 250 lumen super bright tail light - Group Ride Mode – be seen without distracting fellow cyclists - Easy on and off seat post strap mount with quick release tab - Convenient USB rechargeable - Super bright daytime flash mode - Be Seen by cars = Be Safe - FL1 Standard IP64, dust and water-resistant WARRANTY - The Solas 250 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Tail Light - Seat post Mount - USB Cable

German StVZO optimized lens with wide light spread. Two high-output LEDs provide 11 lumens. IPX7 water resistant rating. Composite matrix fender mounting system. E-bike compatible (6v input, 0.6w / 12v input 1.2w) easily plugs into batteries from top makers including Bosch, Shimano and Yamaha. Stainless Allen key hardware and 130cm long power cable included. Our e-bike lights are powered by the motor of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make and model battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you. - Two high-output LEDs provide 11 lumens - StVZO optimized lens with wide light spread - E-bike compatible 6 – 12V input, 1.25W - Composite matrix fender-mounting system - IPX7 water resistant - Stainless Allen key hardware included - 130 cm power cable included

The PDW Kepler eBike Tail Light offers up 220 degrees of visibility. Compatible with any 6V-15V system, this light has 3 super-bright red LED's. Equipped with a pre-installed Bosch plug, the Kepler eBike Tail Light is ready to plug directly into any Bosch eBike system. The Bosch plug can also easily be clipped off for direct wiring into other eBike systems. - Seatpost or seatstay mounting - 220 degrees of visibility - 25 Lumens - 48" cable length - Remove Bosch plug to work with any 6V-15V e-bike system

Mid Cobber produces an incredible 330º of light, so you'll be clearly seen from all angles. In an increasingly busy world, this bike light is brilliantly effective at attracting attention and helping keep you safe on the road. Packing 170 lumens this Mid Cobber is seriously bright. The Cobber has integrated USB recharging, is 100% waterproof and you can program the settings using the Modemaker app. It mounts with tool-less removable silicone straps for bars/seat posts 22 – 32mm+ diameter with magnetic mount (aero Mount also included). If you are looking for the best rear commuter bike light around, look no further. - Light modes: Max, Mid, Steady Pulse, Flash, Rolling Flash, Side Flash, Disco Flash, Eco Flash come pre-programmed - LEDs: Efficient Chip on Board (COB) LEDs designed to provide maximum brightness level for up to 90% of the battery burn time for each mode - Charge time: 4 hours (LED will turn off when fully charged) - Battery: USB Rechargeable Lithium Polymer - Accessories included: Standard Mount, Aero Mount, 3x interchangeable straps for bars/seat posts 22-27mm / 28-32mm+, and USB extension - Dimensions: 62 x 33mm - Weight: 44g

Features: - Up to 20 lumens ANSI standard approved - Runtime: Day mode 4 hrs., High 8 hrs., Middle 15 hrs., Flash 30 hrs. - Li-Po rechargeable battery - Low power indicator - Motion sensor include - IPX4 waterproof rating - Charge via Micro USB cable